- Manuals
- Brands
- Thane Fitness Manuals
- BikeNook
- Assembly instructions manual
Bicycle stand
Hide thumbs Also See for BikeNook:
- Assembly instructions (5 pages) ,
- Assembly instructions manual (64 pages)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
-
- Bookmarks
Advertisem*nt
Quick Links
Download this manual
Bicycle Stand
Assembly Instructions
Advertisem*nt
Related Manuals for Thane Fitness BikeNook
-
Bicycle stand (64 pages)
-
Bicycle Accessories Thane Fitness BikeNook Assembly Instructions
(5 pages)
-
Bicycle stand (8 pages)
-
Bicycle stand (33 pages)
-
Bicycle stand (8 pages)
Summary of Contents for Thane Fitness BikeNook
- Page 1 Bicycle Stand Assembly Instructions...
- Page 2 THANK YOU Congratulations on your choice of the Bike Nook™ bicycle stand, the brilliant new way to store your bike away, quickly and easily. The Bike Nook™ bicycle stand is as easy as 1-2-3 and saves up to 3.5 feet (1 meter) of valuable floor space.
- Page 3 STEP 1 Connect L Piece to Cross Bar Parts Required: 1. Cross Bar 2. L-Piece 3. Foot 11. Socket Wrench 12. Allen Key 13. Washers 14. Nuts 15. Long Bolt 17. Flathead Bolt Connect the L-Piece to the Cross Bar by aligning the arrow on the L Piece to the arrow on the Cross Bar so that both...
- Page 4 STEP 2 Connect the Track to the Cross Bar 4. Track 5. Ramp 6. Diamond Bracket 11. Socket Wrench 12. Allen Key 13. Washers 14. Nuts 16. Bolts Connect the Track to the Cross Bar by placing the Track on top of the L-Piece. Align the holes on the Track with the holes on the L-Piece Place the Diamond Bracket on top of the...
- Page 5 STEP 3 Connect the Upright to the Cross Bar 7. Upright 11. Socket Wrench 12. Allen Key 13. Washers 14. Nuts 16. Bolts Place the Upright in- between the gap between the Diamond Bracket and the L-Piece Ensure the holes of the Diamond Bracket, the Upright and the L-Piece are aligned Place Bolts into each of the remaining two holes in the L-Piece...
- Page 6 STEP 4 Connect the Adjustable Upright to the Upright 8. Adjustable Upright 9. V-Slot 10. Adjustment Knob Align the Adjustable Upright with the Upright and place it on the inside, against the Upright. Given the size of your bicycle, determine what the height of the V-Slot above the Track must be (see Storing your Bicycle section).
- Page 7 STORING YOUR BICYCLE Fig. 1 V-Slot Setting the height of the V-Slot Adjustable Upright Important: To store your bicycle compactly Upright and securely, the V-Slot must be set at a height above the Track that matches the size of your bicycle. Ramp Track Tip: A rough guide to setting the height of the...
- Page 8 Check that the bicycle is stable and securely positioned. If not, return the bicycle to the horizontal position and adjust the height of the V-Slot (lowering or raising it) above the floor. Important: For stability, check that the V-Slot is at a height so that the weight distribution of the bicycle is backwards –...
- Page 9 Bike Nook™ Pro Kit Upgrade (Optional) Assembly & Use Instructions The Bike Nook™ Pro Kit is an attachment that connects to the Upright of the Bike Nook™ Pro to accommodate and store bicycles fitted with back racks and/or fenders (mud guards). For these bicycles it may be difficult to engage the back wheel of the bicycle with the Upright.
- Page 10 Step 2 Assemble the Adjustment Arms & Connector Plate Overlap the holes in the Adjustment Arms – one in front of the other, with the Support Bars facing in the same direction and away from you (see Fig 2). Place the Connector Plate behind the overlapping Adjustment Arms - and on the same side of the Adjustment Arms where the Support Bars are connected.
- Page 11 Step 4 Set the Adjustment Arms & Support Bars To support the sides of the fender or rack of your bicycle when stored on the Bike Nook™ Pro, the Adjustment Arms can be set with the Support Bars at various distances apart - from narrow to wide (see Fig. 5 – 7 ). Tighten &...
- Page 12 Step 5 Attach the Sleeves onto the Track and/or Upright The purpose of the Sleeves is to protect your bicycle fender and/or rack from making direct contact with the Track and/or the Upright and getting damaged. The positioning of the Sleeves depends on whether your bicycle is fitted with just a fender, or just a rack, or with a rack and a fender.
- Page 13 Step 6 Store your Bicycle Roll the back wheel of the bicycle over the Ramp onto the Track, guiding the fender or rack between the protruding Support Bars until either the wheel (in case of a short fender) or the fender (in case of a long fender), or the rack engages with the Sleeves on the Upright (see Fig 9).
- Page 14 © 2020 Thane IP Limited. MADE IN CHINA “Thane”, “Bike Nook”, “Bike Nook Pro”, and related logos and variations are trademarks or registered trademarks, in Canada and/or other countries, of Thane IP Limited and/or its affiliated companies. BikeNook upgrade kit MNL ENG R1 200916...
